Forms
Coiling Options
Bunch Coils
• 30” to 32” inside diameters
• 50-90 pounds maximum weight
• Pressure test only
• Typical OD size range .040" - .156"
Pancake Coil
• 13” to 27” diameters (up to 100 ft. in length)
• OD size range .125" - .750"
• Eddy Current tested
Helical Coils
• up to 13” diameter (up to 50 foot in length)
Straight and Cut Length Capabilities
• Precision short cut, straight-length tubing, from approximately 0.125”, up to 42 feet (depending on product). Consult Sales for longer lengths.
• Finish Cut tolerances from +\-0.0075”.
• Commercial tolerances per ASTM B251 may apply for certain product.
• Burr Capability as follows:
• 0.003” Maximum OD/ID burr for clean cut product
• 0.002” Maximum OD/ID burr for de-burred tubing.
Small Level Winding Capabilities
• OD Size - 0.040” to 0.175”
• Reel Diameter - 14” to 20”
• Coil Width - 2” to 6-5/16”
• Coil Weight - 50 to 90 pounds
• Banding Type - Tie Wire or tape
• Ends - Capped, Sealed or Soldered
Large Level Winding Capabilities
• OD Size - 0.188” to 0.875”
• Coil (ID) - 24”
• Coil (OD) - 36” max.(on reels), 38” max. (not on reels)
• Coil Width - 4”, 6” or 10”
• Coil Weight - up to 400 pounds
• Eddy Current tested
• Alloys Available - 101, 102, 120, 122, 510, 706, 715
• Shapes Available - round, square and rectangular